DC1800 is particularly suitable for general cleaning and source extraction from handheld power tools (with suction casings up to ø 125mm/5”) and small table saws. The DC 1800 is equipped with a container. A plastic bag can be used inside the container to facilitate the emptying of dust and other material.
The DC 1800 eco is delivered with the following:
- Suction hose (Ø 38) 5 m (Part No 2105)
- Aluminium floor tool B 370,1.5”/38 mm (Part No 7235)
- Chrome steel suction pipeØ 1.5” /38 mm (Part No 7257)
- Plastic sacks (Part No 42291)
- Basket for plastic sack (Part No 42369)
- Fine filter, cellulose (Part No 42029)
- HEPA H13 filter (Part No 42027)
————————————–
Marking Filtering Efficiency
In order to ensure that the dust extractor meets the requirements outlined in the relevant work environment provisions, it is classified in line with a standardised test. In accordance with the EN-60335-2-69 standard for the testing of dust and water extraction units, there are three classifications for dust extractors: L for low, M for medium and H for high. The category required for a specific application is determined on the basis of the maximum allowable concentration (MAC) for that type of dust in the work environment.
In accordance with EN-60335-2-69, the test comprises two phases:
1. Testing of the filter system (fine filter and HEPA filter, where relevant).
2. Testing of the fully assembled dust extractor.
 |
H – High is the class with the most stringent criteria, stipulating a filtration efficiency of 99.995% for particles measuring from 0.1 to 5.0 μm. The machine is capable of maintaining a MAC |
 |
M – Medium has an efficiency of >99%.
|
 |
M – Medium has an efficiency of >99%.
|
 |
The machine is certified by a third party – IFA, in
|